Small to Middle Scale
PLC (Type1 Light)

Key Benefits

The Integrated Controller V series Model 2000 Sequence Control Module (S2) has a proven track record in a wide range of fields as the core component of social infrastructures and industrial systems. As well as handing down existing assets such as S2 applications, I/O, and wiring, type1 light offers enhanced control performance and supports the transition to next-generation control systems.

 

The type1 light D CPU supports redundancy. Redundancy enables greater productivity by providing the highest system availability. With a program capacity of 128K steps and the ability to connect up to 192 I/O modules, the type1 light D is ideal for critical medium and large-scale systems.
The module can also be used in a single module configuration.

 

High Performance and Critical System Reliability

Automatic switching to the secondary CPU occurs if a problem is detected in the primary CPU.

 





Duplex System Configuration

Local I/O

  • BU643D Basic base

  • PUM14 CPU module

  • IF661 Expansion interface

  • IF658 Expansion interface (2 ports)

  • PS693 Power source module

  • EN651 Ethernet 100M

  • BU668 Expansion base

  • DI633 G2 I/O DI 16 points

  • DO633 G2 I/O DO 16 points

Local I/O unit

  • BU643D Basic base

  • PUM14 CPU module

  • IF661 Expansion interface

  • PS693 Power source module

  • EN651 Ethernet 100M

  • BU668 Expansion base

  • GA922 G2 I/O adapter

  • DI633 G2 I/O DI 16 points

  • BU901 TC-net™ I/O adapter base

  • DO633 G2 I/O DO 16 points

  • SA912 TC-net™ I/O adapter

  • BU905 TC-net™ I/O base

  • DI934 TC-net™ I/O DI 32 points

  • DO934 TC-net™ I/O DO 32 points

 

The Unified Controller nv series™ TC-net™ I/O is built-in to the type1 light H CPU. It can be applied to I/O systems to provide enhanced performance. The master station, built into the CPU module, enables direct connection of the TC-net™ I/O loop. A 4 km-long remote I/O system can be installed at a low cost. The connected I/O can be selected from Integrated Controller V2000 series I/O (G2 I/O) or Unified Controller nv series™ TC-net™ I/O.

 

Remote I/O System Configuration

TC-net™ I/O collects and controls remote field I/O in real-time. The TC-net™ I/O is a high-speed, robust communications I/O system that uses a fiber optic cable that is highly resistant to electrical noise.

 

 

Basic System Configuration

Local I/O

  • BU648E Basic base

  • PUM12 CPU module

  • IF661 Expansion interface

  • PS693 Power source module

  • EN651 Ethernet 100M

  • DI633 G2 I/O DI 16 points

  • DO633 G2 I/O DO 16 points

  • BU668 Expansion base

Local I/O unit

  • BU648E Basic base

  • PUM12 CPU module

  • IF661 Expansion interface

  • PS693 Power source module

  • EN651 Ethernet 100M

  • DI633 G2 I/O DI 16 points

  • DO633 G2 I/O DO 16 points

  • BU901 TC-net™ I/O adapter base

  • SA912 TC-net™ I/O adapter

  • BU905 TC-net™ I/O base

  • DI934 TC-net™ I/O DI 32 points

  • DO934 TC-net™ I/O DO 32 points

  • BU668 Expansion base

  • GA922 G2 I/O adapter

 

The type1 light S CPU mounts in a standard V2000 I/O rack (3 I/O, 5 I/O or 8 I/O racks are available). It can replace a S2E module.
The type1 light S does not support racks with station bus, or I/O modules that require a station bus.

 

Compact CPU Module

The type1 light S CPU has both an RS485 port and an Ethernet port which supports Toshiba's ASCII computer link protocol. This allows connection by any HMI or SCADA software that has the Toshiba computer link driver.

 

Basic System Configuration

 

Local I/O unit

  • BU668 Basic base

  • PUM11 CPU module

  • IF661 G2 I/O interface

  • PS693 Power source unit

  • DI633 G2 I/O DI 16 points

  • DO633 G2 I/O DO 16 points

  • BU668 Expansion base

 

Image Gallery